SKU: Tracker 2800S

The NEW 2800 series of Huntron® Tracker® is designed to complement conventional test instruments in the debug and troubleshooting process.

Using the proven power-off test method known as Tracker Signature Analysis eliminates the risk of further circuit damage, which often occurs when power is applied. The Huntron Trackers are suited for todays mixed signal circuit cards where Analog and Digital are mixed together. The Tracker 2800S features variable range parameters resulting in over 100 combinations of voltage, source resistance and frequency. The 2800 series is a great off -line support tool for the automated Huntron Access Prober diagnostic systems. The new Tracker 2800 and 2800S use a color touch screen for control of selected features such as DC Voltage Source control, pin selection (2800S) and Channel A/B alternating rate. The Huntron Tracker 2800 series display provides a very fast screen refresh rate that approaches the speed of an electrostatic CRT display for quick screening of component pins. The enhanced range selections complement the Huntron Tracker Model 30 ranges as well as provide expanded test coverage.

Add Multi-Pin Scanning Capabilities to Save Time

The Tracker 2800S can scan and compare up to 40 pins per channel using standard IC clips and Cables. Connections are made through the front panel using standard IDC style connectors. Comparison can take place manually or automatically, allowing you to pick out the signatures’ differences quickly

Tracker Signature Analysis

The Tracker works by applying a current-limited AC signal across two points of a component. The current flow causes a vertical deflection of the CRT trace, while the applied voltage causes a horizontal deflection. Together they form a unique V/I signature that represents the overall health of the device under test. Analyzing the signature can quickly determine whether the component is good, bad, or marginal.

Specifications

Waveform: Sine wave
Test Frequencies: 20 Hz, 50/60 Hz, 200 Hz, 300 Hz and 2k Hz
Open Circuit Voltage: 200mVPK, 3VPK, 5VPK, 10VPK, 15VPK, 20VPK
Source Resistance: 10ohm, 50ohm, 100ohm, 500ohm, 1kohm, 5kohm, 10kohm, 50kohm and 100kohm
Channels:2 (A, B)
Connections:Banana (for Chan. A, Chan. B and Common)
Display Modes: A B ALT
Scan Modes:Manual or Automatic
DC Voltage Generator:Level: 0-+5VDC
Source Resistance: 25Ω
Maximum Current: 200mA
Display:Color TFT LCD with Touch Screen; LED Backlight
Power Requirements
Line Voltage:100/115VAC - 230VAC
Frequency:50/60Hz, 50Hz Weight: 6.0 lb
Warranty: 1 year, limited

Supplied Accessories

The Huntron Tracker 2800 comes complete with:

Huntron MP20 MicroProbes

(1 pair)Common test leads
One blue clip lead

"20 and 40 pin DIP clips and cables
Power cord and instruction CDROM

PRICE:

$3,729.33

Quantity:

E-mail a friend about this item.

Return to Catalog